Wiimms wbfs tool download

Images, WBFS partitions and directories are accepted as source. If multiple sources entered, the destination must be a directory.

All used WBFS blocks are copied to the destination file and unused blocks are skipped and stored as sparse blocks. A skeleton contains only disc and partition headers for further analysis and is not playable because all files are zeroed.

Print help and exit. Print some internal information about the keywords. Translate an exit code to a message name. Scan compression modes and print the normalized names. Check, if the requested features are available. Analyze files and partitions for WBFS usage. List all discs of WBFS partitions with size and region. List all discs of WBFS partitions with date, size and region.

List all discs of WBFS partitions with date, time, size and region. List all discs of all WBFS partitions. List all discs of WBFS partitions in mixed view. List all discs of WBFS partitions and include fragmentation info. Check WBFS partitions and print error listing. Check WBFS partitions and repair errors. Create very small skeletons of ISO images.

If creating a partition the file 'align-files. If creating or moving partitions the beginning of each partition is set to an offset that is a multiple of the align size. Parameter align defines the aligning factor for new WDF images. It must be a power of 2 and smaller or equal than 1 GiB. Usual values are 1, , 4K and 32K. The optional parameter minhole defines the minimal hole size, before a new chunk is created. If NULL, an internal value is used to minimize the total file size.

Enable the usage of extracted images. Without value, ON is used. If mode is AUTO , extracted images are usually enabled. Enable the detection of NKIT images. Anyway, NKIT images are not supported yet, but detected to print warnings.

Use an array on script output if possible. In this case, only one output file is created. Select 'atime' last access time for printing. Enable auto split modus: Split only if necessary and determine the split size automatically.

In future versions it becomes the default. This patching option changes the ID of boot. Only defined characters not equal '. Option --boot-id overrides the definition of option --id. Defines an operation mode for --chunk-size and --max-chunks. The case of the keyword is ignored. The default key is 'ISO'. This calculation also depends from option --max-chunks. The default unit is 'M' MiB. If the input file size is not known e. Define the modus for colored text output.

Without parameter, ON is used. AUTO will enable colorized output only for terminals. Select one compression method, level and chunk size for new WIA files. The syntax for mode is: [method] [.

These additional keywords may change their meanings if a new compression method is implemented. It defines the compression level. The special value. The base size is 2 MiB. The value 0 is replaced by the default factor 20 40 MiB. If the factor is not set but option --chunk-size is set, the factor will be calculated by using a rounded value of that option. All three parts are optional. All default values may be changed in the future. Define a configuration file or a directory as source.

In later case, file 'wiimms-iso-tools. If option is not not set, then file 'wiimms-iso-tools. Instead create a copy of the source image and store it as 'game. If the source image is already in this format, try to create a hard link and copy only if it fails. Select 'ctime' last status change time for printing. Define a destination path directory or file. The destination path is scanned for escape sequences see option --esc to allow generic paths. This patching option changes the ID of the disc header to the given parameter.

One of the main functions of WIT is to convert files between formats. In order to do so, we use wit copy. This command takes 2 parameters, namely the source ISO and the destination folder. The dot. You may alternatively specify an actual path:. In order for USB loaders to find your game, it needs to be placed in the correct folder structure:.

The output can be filtered with the powerful option --files. If the option --files is set the the diff works on file level. This is good for analysis. For all commands working with Wii ISO images the options --include , --include-path , --exclude and --exclude-path setup up filters to decide which ISO images are used for the operation.

The options --quiet and --verbose control the verbosity. Both option can be set multiple times to decrease or increase the verbosity. When creating plain WBFS files the tools try to create sparse files to reduce disk usage. The working WBFS are defined by the options -part , --auto and --all. The option --auto scanns all drives for valid WBFS partitionss.

Together with option --recover it try to recover an already existing WBFS. Options like --long , --mixed , --unique , --no-header , --sections and more control the formating. The options --update , --newer , --sync --ignore and many more controls the operation. Cloning of WBFS is done with this command too.

This check ist very fast less than 1 second. All commands, which will modify the WBFS, do a silent check and report, if harmless errors found, or stop execution, if harmful errors found. When reading an ISO image all tools look inside the file to detect the file type. It defines the compression level. The special value. The base size is 2 MiB. The value 0 is replaced by the default factor 20 40 MiB. If the factor is not set but option --chunk-size is set, the factor will be calculated by using a rounded value of that option.

All three parts are optional. All default values may be changed in the future. Instead create a copy of the source image and store it as 'game.

If the source image is already in this format, try to create a hard link and copy only if it fails. Select 'ctime' last status change time for printing. Define a destination path directory or file. The destination path is scanned for escape sequences see option --esc to allow generic paths. This patching option changes the ID of the disc header to the given parameter. Option --disc-id overrides the definition of option --id.

This patching option replaces the domain 'nintendowifi. The length of the new domain must not be larger than the old length 16 characters. If the new domain length is not larger than 11, then 'gamespy. This is a special support for 'Super Smash Bros. With activated flag, writing an image is some percent slower, but the progress counters are exact again. Parameter MODE is optional. Linux does. Define the encoding mode. The case of the keywords is ignored.

The default mode is 'AUTO'. Define an alternative escape character for destination files. A comma separated list with ID4 and ID6 values is expected. If the parameter begins with a ' ' the given file is read and each line is scanned for one ID. Images with the given ID are excluded from operation. Each use of this option expands the exclude list. See --include-first for precedence issues. Scan the ID of the source and add it to the exclude list.

If the source is a directory then scan all images of the directory. Add a certificate selection rule. All certificates that matches the rule set will be fake signed. This option is only used if comparing discs on file level. If not set or set to null, then all files will be compared.

If set to a value greater than comparison is aborted for the current source image if the entered number of files differ. Append file select rules. This option can be used multiple times to extend the rule list. Rules beginning with a ':' are macros for predefined rule sets. While extracting a disc image strip all path names of the source file and store all files in the same directory.

This option sets the default for --pmode to NONE. The value defines the block size, if creating a GCZ image. The default is 16K also Dolphins default. Smaller values enlarge the managment data and reduce the compression ratio. Use the option with caution! If creating a GCZ image, a blockwise z-compression is tried. If the compressed data is larger than Encrypted blocks are stored directly as uncompressed data, because the Option --gcz-zip disables this optimization for encrypted data and makes the creation process slower.

This patching option replaces 'https' request to 'http' in the files 'main. It also replaces the sub-domain 'naswii' to 'nas'. This patching option changes the ID of the disc to the given parameter. The disc header, boot. The option --modify selects the objects. Fake signing is not necessary, but the partition becomes invalid, because the content of some files is not copied.

If such file is accessed the Wii will halt immediately, because the verification of the checksum calculation fails. The processing order of file options is: » --rm-files --zero-files --ignore-files «.

Disable composing and ignore FST directories as input. While composing ignore the file 'setup. A comma separated list with ID values is expected. Only images with the given ID are included into the operation. Each use of this option expands the include list. The options --include , --include-path , --exclude and --exclude-path decide which discs are included into the operation.

If neither include nor exclude options are used, than all disc are included into the operation. If only include options are used, than only the specified discs are operated. If only exclude options are used, than all all discs but not the excluded are operated.

If include and exclude options are used together and --include-first is not set, than all discs are operated that are specified by any include option and not by any exclude option.